Scuba Spare Parts
What’s the next best thing to jumping into an sea, ripe with life and adventure? Spend time exploring our online dive shop! We’ve got most of the spare parts for your diving equipment, or even replacement batteries.
Nut vp 14
DIN CONNECTOR 300BAR 82-72-62-15-2S 1ST
DIN connection for use at 200 and 300 bar. With a conical sintered filter.
Suitable for the following Mares first stages:
- 82X
- 62X
- 15X
- 2S
price 42JD
Bonnut vp10
2ND STAGE DIAPHRAGM (60SH) BK
INSPECTION PLUG 2 ST. PRESTIGE E-845
HOSE CONNECTOR E-389/B
HP-HOSE-15CM
Allows you to move the LED probe module away from the first stage. Ideal for improving signal reception in complex configurations. The 15 cm HP tube allows you to move the LED probe away from the first stage. Helps prevent breakage due to the module crashing or the tank tipping over.
Regulator DUST CAP
- Highly Flexible Nylon Polymer.
- Fits standard Int - A' Clamp.
- Quick and convenient attachment.
PISTON 1ST STAGE E-964/B
SPACER RING FOR BYPASS YELLOW
DIAPHRAGM, 1ST ST. REGULATORS E-166/D
PLATE, SPRING BASE, 1ST ST.REG E-172/C
spring-poppet
PISTON PLASTIC SEAT
HP HOUSING ASSEMBLY
SERVICE-KIT-ROVER-PRESTIGE-CARBON-CR
service-kit-first-stage-15x
Service Kit 1st. R2S INT/DIN
SEAT-VALVE
poppet-seat-2nd-stage
Rover Cover
O-Rings 010 LP Hose / 2nd Stage
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- ID x CS : 6,07 x 1,78 mm
O-Rings 006 Power inflator stems
- ID X CS : 2,8 X 1,78 mm
- Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
- JJ-CCR ADV lever retaining screw seat
022 Regulator piston O ring
- ID X CS : 25,12 X 1,78 mm
- Used for Common regulator piston ring; Body plug seals; Paintball guns
- Cressi sub piston oring as HZ735108
O-Rings 012 HP Port Hose Manifold
- ID X CS : 9,2 X 1,7 mm
- Used for Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
O-Rings 111 Small DIN Reg Valve
- Used for Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets;
- Piston HP barrel BC hose coupler, Standard Low-Pressure Port/Hose (3/8 UNF)
- ID x CS : 7,65 x 1,78 mm
011 Standard LP Port Hose
- Used for Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets;
- Piston HP barrel BC hose coupler, Standard Low-Pressure Port/Hose (3/8 UNF)
- ID x CS : 7,65 x 1,78 mm
O-Rings 020 Sherwood 6400-102
- ID X CS : 21,9 X 1,7 mm
- Used for Regulator piston ring (USD & SAS)
O-Rings 014 Yoke Regulator K-valve
- ID x CS : 12,4 x 1,7 mm
- Used for Std. Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminum cylinder valve to yoke regulator
Scuba Diving O-Rings 906
- Scuba O-Rings NBR 70Sh – 906
- ID x CS : 11,9 x 1,98 mm
Air Spool O-Rings for SPG Swivel
- ID x CS : 1,4 x 1,5 mm
- Used for LP Hose; Submersible pressure gauge/consoles: internal swivel seal
O-rings for Standard DIN Regulator 112
- ID x CS : 12,3 X 2,62 mm
- Used for standard DIN Regulator Valve; Steel tank valve; Basal DIN seal
Tank Valve O-Ring Size 214
- Scuba tank neck o-rings
- ID x CS : 24,99 x 3,53 mm
- Used for Cylinder to 3/4 valve seal; Cylinder to M25X2 valve Seals
- Scubapro part no: 01.050.259
Scuba Tank Valve Bonnet Nut 015
- ID X CS: 13,9 X 1,7 mm
- Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals, paintball tanks
Scuba O-Ring 005
- ID X CS : 2,5 X 1,78 mm
- Used for Seal used in older depth and tank “stem” gauges
hand wheel tank
Stem vp 07
Seat vp 05
vp11 hand wheel washer
Teflon washer vp 09
